A great alternative to embroidery, Stripflock Pro heat transfer vinyl gives logos a raised, textured, suede-like feel. The fuzzy opaque colors make Stripflock Pro excellent for retro designs like you'd find in a mall in the 80's, or anytime you want a deep, rich look. Stripflock Pro is thick enough to cover hat seams, yet also looks excellent on bags, denim and other garments that need a textured visual interest. Use Stripflock Pro as a base layer and cover with other materials such as Easyweed Stretch for an embossed look, or layer with more Stripflock! The ability to layer this material with itself and others allows you to say 'yes' to multi color designs. However, please note that for best results all fluorescent colors are recommended to be layered with the knockout method and the carrier peeled warm.
This item is 12" wide x 360" long (10 yards/30 feet)
This item is available in twenty four (24) colors.
This item is 16.1 mils thick and requires a heat source (an iron or heat press) to apply it.
This item can be applied to cotton, polyester, cotton/poly blends and leather.
This item WILL NOT stretch but it will layer.
Application instructions: Press/preheat garment at 311ºF for 4 or 5 seconds (this will get the moisture and wrinkles out), place design, heat press for 15 seconds with medium to firm pressure. Peel carrier sheet WARM.
Care instructions: This item can be dry cleaned. Turn garment inside out machine, wash in cold water on gentle cycle with mild detergent. DO NOT bleach. Hang dry or dry on low heat. Wait at least 24 hours after vinyl application before garments first wash.
Cutting instructions: Every plotter/vinyl cutter is different. Please join our sales group on Facebook for charts and details on cutting different materials with different machines (Cricut, Silhouette, Brother, Graphtec, USCutter, etc)
This item is 100% genuine Siser and may be off (+/-) up to 1/4" per sheet.
NOTE: This item is thick and requires increased downward pressure of your blade to ensure a clean cut and easy weeding.
NOTE: All fields have to have a number in them, even if it's 0, before you add to cart.