For sparkle that rivals rhinestones, check out DecoSparkle®! DecoSparkle® is a holographic heat transfer vinyl that creates stunning reflective rainbow color effects. It offers exceptional abrasion resistance. This polyester film is dimensionally stable and does not stretch or layer. Use this in place of Rhinestones for a more permanent design.
This item is 19.25" wide by 180" (5 yards/15 feet) long.
This item is available in six (6) colors.
This item is 4.2 mils thick and requires a heat source (an iron or heat press) to apply it.
This item has a stunning reflective rainbow effect and can be used to create a 3D rhinestone look.
This item can be applied to cotton, uncoated polyester, fabric blends and linen EXCLUDING nylon.
This item WILL NOT stretch or layer.
Application instructions: Press/preheat garment at 300ºF for 4 or 5 seconds (this will get the moisture and wrinkles out), place design, heat press for 15 seconds with medium to firm pressure. Peel carrier sheet COLD.
Care instructions: This item can be dry cleaned. Turn garment inside out machine, wash in cold water on gentle cycle with mild detergent. DO NOT bleach. Hang dry or dry on low heat. Wait at least 24 hours after vinyl application before garments first wash.
Cutting instructions: Every plotter/vinyl cutter is different. Please join our sales group on Facebook for charts and details on cutting different materials with different machines (Cricut, Silhouette, Brother, Graphtec, USCutter, etc)
This item is 100% genuine Speciality Materials and may be off (+/-) up to 1/4" per sheet.
NOTE: This item is thick and requires increased downward pressure of your blade to ensure a clean cut and easy weeding.
NOTE: Spectrum has a manufacturer line that appears every 16-18" (every other sheet). This is not a defect, it happens in every roll and we will not refund these sheets due to the line.
NOTE: All fields have to have a number in them, even if it's 0, before you add to cart.